Condition Monitoring Development Kit
The BluVib Lab Kit is a wireless vibration sensor development kit which is already set up to talk to the BluVib sensors, giving you an easier turnaround when developing condition monitoring solutions. Configure and read data from sensors before having to write a line of custom code. The gateway runs Linux and comes pre-loaded with the Sensor-Works ReST API, so you can set up sensors and read, store and export vibration and temperature data straight away.
Outstanding measurement capability for verifying setups and sensor measurements before deployment
Configure and read data from sensors before writing custom code, then verify, test and control sensors as you develop
Suitable for harsh industrial conditions, with a corrosion resistant sensor sealed to IP66 for use in wet and dusty environments
Low power radio and power management give up to five years of battery life depending on measurement intervals
Channels: 4 (3 x vibration plus 1 x temperature)
Range: Programmable to ±16 g
Frequency: DC to 6 kHz trending, DC to 10 kHz spectral
Temperature: −25 °C to +75 °C
Sample Rate: Programmable, 256 Hz to 25.6 kHz
Block Length: 64 to 2,097,152 samples
Network: Bluetooth 5, compatible to 4.2
Certifications: R&TTE, FCC, IC
Dimensions: 33 mm dia x 92 mm high
Weight: 100 g, aluminium base
Sealing: IP66
Battery: SAFT LS17500, field replaceable
Battery Life: Up to 5 years
A Raspberry Pi 5 gateway supplied with a power supply and pre-loaded with the Sensor-Works ReST API application
A MEMS triaxial vibration and temperature sensor on an aluminium base, fitted with a field replaceable battery
You will need a few standard peripherals to connect to the gateway and view the interface
Supplied products may differ from images shown, as they are for illustration purposes only.
View the full data sheet or contact us for a quote